Precautions For The Design Of Electronic Digital Product Packaging

- Aug 29, 2018-


The performance of the packaged product:


The performance of the packaged product mainly includes the physical state, shape, strength, weight, structure, value, and hazard of the product. This is the first consideration when packaging.


Product physical state. There are mainly solid, liquid, gaseous, mixed, etc., different physical states, and their packaging containers are also different.


Product shape. There are mainly square, cylindrical, polygonal, and special shapes. The packaging should be designed according to the shape characteristics of the product. It requires small packaging volume, good fixing, stable storage, and meets the standardization requirements.


Product strength. For products with low strength and vulnerability to damage, take full account of the protective properties of the package, and there should be obvious marks on the outside of the package.


Product weight. For heavy products, pay special attention to the strength of the package to ensure that it is not damaged during circulation.


Product structure. Different products often have different structures, some are not resistant to pressure, and some are afraid of impact. Only when the product structure is fully understood can the different products be properly packaged.


Product hazard. For flammable, explosive, toxic and other dangerous products, to ensure safety, there should be precautions and specific markings on the outside of the package.


The impact of the environment on the product:


Products in the process of circulation, will encounter different environments, they will have different impact on the packaging, so the corresponding measures should be taken.


Weather condition. There are mainly sunlight, temperature, humidity, rain, snow and air. They have different effects on different products, which need to be considered separately for different meteorological conditions.


Loading and unloading conditions. Conditions such as manual loading or unloading, as well as loading and unloading times should be considered.


Transportation conditions. During the transportation process, the product will be affected by impact and vibration, and different transportation tools will have different effects on the packaging. Product fixation and buffering should be considered primarily.


Storage conditions. Storage multi-purpose stacking, packaging should be investigated for its compressive strength. In addition, the storage is also divided into indoor storage and outdoor storage, the former should pay attention to moisture, mildew, waterproof, etc.; the latter should pay attention to rain, snow, sun, wind and so on.